This article is intended for
- Reseller
- Installer
What is this article about?
Adding devices to Steplock Cloud. A "device" within the Steplock Access System family can be any piece of hardware, ranging from intercoms and door central units to information screens and card readers. This article explains how to add them to your system.
Add a device to your system
Log in to your admin account.
- In the menu on the left side, click on 'Devices' and then 'All devices'.
- Click on the 'Add device' button.
In the 'Information' section, you will find two fields that need to be filled out;
- 'Name': Enter the desired name for the device, such as 'Main Entrance' or 'Ground Floor'. The choice of name is entirely up to you. However, ensure consistency in your naming scheme.
- 'Mac-address': Enter the Mac address of the device. The address is located on the outside of the box and directly on the device itself.
- After entering both name and Mac address, click the 'Add' button.
Click center of image to play video
Note:
- Configuration of your device: Once you have added a device, you will be directed to the device's configuration page. Depending on the type of device you have added, the configuration settings will vary. To configure your device, see the section on this website called Device Configuration.
- Filtering: After adding devices to your system, a device filter will become available under the 'Devices' menu. This feature allows for quick and efficient filtering of your various devices. For example, if you want to focus exclusively on your connected intercoms, simply select intercoms.